How often have you wanted to remove that shower insert and replace it with something nicer? Prefabricated shower inserts (AKA acrylic showers or fiberglass showers) can offer a quick remodel or build. They are generally more budget-friendly than a traditional tile shower. They come in various sizes and shapes. These are positives that you may appreciate when installing a shower. However, there are several downsides as well.
Main Content
Most Recent
Which Drywall Anchors to Use?
There is nothing worse than trying to hand something on a wall only to have it fall, or worse, tear a huge hole in the wall.
Drywall (aka sheetrock) is not made to support the weight of wall art or other necessary wall hangings. This is why using the correct drywall anchors is so important.
Paint Color of the Year
Each year, those in the know offer their predictions for color trends and what is to come. Sometimes those predictions turn out to be accurate. Sometimes… not so much. This year the colors have been predicted, and you may be surprised at where we are heading.
Under-the-Sink Storage and Organization Tips
Organizing under your sink not only makes things easier to find but also can increase storage space in kitchens and/or bathrooms. But what about that bulky drain line that is in the way? Not a problem. There are solutions for every under-the-sink design.
18 DIYs for a Designer Kitchen
Everyone wants to have a fabulous kitchen. However, most of us either don’t have the time or the budget to embark on a complete makeover – regardless of how much we would love to do one. So, what can be done to update or improve upon a kitchen that isn’t going anywhere for a while.
Microwave Location Options
One of the most difficult decisions many faces when building or designing a kitchen is deciding where to put the microwave. Which type of microwave is best? And where exactly is the best location?
DIY Pastry Board and Stove Cover
I have been wanting a large pastry board for a while now, and I finally got around to building one. It turned out GORGEOUS! I made mine out of walnut to get those deep beautiful tones. It is double-sided, which means I can flip it over and use the other side as a cutting board.
7 Ways to Flatten Wood
Every woodworker needs to have a way to flatten wood. If you think this requires you to own an expensive piece of equipment, you would be wrong. There are several options available for every budget. Each has its limits, but each can be used to create a nice flat surface to any wood plank or board.
5 Ways to Get Rid of Algae On Outdoor Surfaces
The only thing required for green algae, mold, and mildew to grow on your outdoor surfaces are moisture, shade, and a food source. The most common areas are along the northern side of homes, under trees, and in other shaded areas where drainage is slow. But we have 5 easy ways to get rid of algae, mold, and mildew on your outdoor surfaces.
Kreg Pocket Hole Jig
I want to introduce you to one of my favorite workshop tools – the Kreg pocket hole jig. If you don’t own at least one pocket hole jig, you really ought to consider getting one. There is a jig for every price point and/or frequency of use.
Most Popular Posts
Easy Way to Add Pull-Out Drawers to Bottom Cabinets
I truly believe that base cabinets were placed on earth as some cosmic joke. Well, maybe it’s not that extreme, but it certainly is aggravating to try to store things in them. You either end up with everything right at the front and a ton of wasted space in the back, or you have to take everything out anytime that you need something. Adding drawers is the solution, but so many people tell me that while they love DIYing, they just don’t have the skills or tools to do something so drastic. However, there is an easy way to add pull-out drawers to bottom cabinets, and I am going to show you exactly how!
In the Event of My Death – Free Printable
What Your Family Needs to Know…
In the event of my death – free Printable
Not long ago, my uncle (whom I shall refer to as “A”) suffered a severe stroke. Although he has not yet made a full recovery, we were thankful that he survived it. However, the many months following the stroke were incredibly difficult for my aunt (whom I shall refer to as “B”), and not just because of the health issues. You see, “A” had always handled the finances, bills, and what not. While, “B” just did her job and spent money as needed.
How To Adjust Washing Machine Water Levels
How To Adjust Washing Machine Water Levels – One of my biggest frustrations of late has been my new front load washing machine. I recently bought a whole new set, shiny and pretty to look at, with all of its futuristic buttons that light up and make Close Encounters of the Third Kind music. I guess they have to add all that new fangled stuff to keep you from paying attention to the fact that you will no longer be getting clean laundry. Can I please have my 1990s machine back, now?
Why Your Washing Machine Smells!
Back when the front load washers were just first coming out on the market, I was so thrilled to be getting a new set. I had dreamed of the day when I no longer needed to make a trip to the laundry mat or to use the cleaners for my larger items. Then, the day came and I gladly handed over the cash for my two new beauties. Little did I know, at the time, that I was about to embark upon one of the most challenging household problems that I had yet to encounter – the dreaded front loader stink!
How To Cut Any Angle With a Miter Saw
Have you ever wondered how people get all those elaborate angles in their woodwork? I use to only use them when I was doing an inlay in wood flooring. Then, I started building decor pieces for my home, and I ventured fully into the territory of mitered angles that go beyond the standard 45º cut. With furniture and cabinetry, it is all about creating curves and box shapes. But when you want to get creative with something, you may find that you need some weird angle – like a 50º, 60º, or 70º miter. It can present a conundrum. So, I thought that I would show you how to cut any angle with a miter saw.
Seasonal Favorites
How to Flock a Pre-Lit Christmas Tree
Have you ever wondered how to flock a pre-lit Christmas tree? My pre-lit tree has been with me for 10 years, now. It has been stuffed and crammed and bent in all sorts of ways throughout that time, and the only wear and tear that it has displayed has been the burning out of the lights.
Easy Halloween Decorations
Well, the holidays are just right around the corner, and with October finally here, it’s time to start rolling out the decor. So, I thought that I would show a few of my favorite easy Halloween decorations. Each one of these crafty projects can be completed in just a matter of minutes, and usually from items that you already have around the house.
18 Wonderful Christmas Mantels
The fireplace is one of the focal points for holiday decorations. Next to the Christmas tree, the mantel is probably the most popular location for decorations. So, in the spirit of the holidays, I am presenting these 18 Christmas mantels for your enjoyment. Hopefully, they will inspire some great ideas for your own home.
DIY Christmas Lamppost and Lantern
One of the things that I love about the town that I live in all of the streetlights that are reminiscent of the last century. I am especially fond of them during the holidays when the town pulls out the seasonal decorations. This is what led me to build my own DIY Christmas lamppost complete with lantern.